Breathe Clean Air
Bi-Polar Ionization (Cold Plasma) works by splitting water molecules into Positive and Negative Ions allowing them to proactively attack Contaminants and Pathogens, such as Mold, Viruses and Allergens, where they live utilizing the airstream of the existing HVAC system. Until now, our only defense against these enemies was expensive filtration and relentless cleaning. Let us install a Cold Plasma Generator today and start using a new patent pending, scientifically proven technology that not only kills pathogens, and reduce contaminants, but eliminates smoke and odors. There is no longer a need to draw them into the return filter because this technology breaks them down into harmless/odorless compounds before they can infect a healthy person. Once installed they require virtually no maintenance and no parts or filter replacements, allowing you to Breathe Clean Air immediately! Prices start at just $795 per HVAC Unit with several options and multiple unit discounts.
(Click Here for Quotes and Orders)
(Click Here for Quotes and Orders)
|
|
Test Results
Mold ReductionOn October 26, I took 2 airborne mold samples within the property in order to determine how many airborne spores were present. I used an air pump and drew 75 liters of air through an special filter which captures
airborne mold. The lab report results show that there were: - 335,518 total airborne mold spores per cubic meter in the main room of the basement. - 356,912 total airborne mold spores per cubic meter in the back bedroom of the basement. The predominant species that were captured are chaetomium, cladosporium, aspergillus and penicillium. The airborne samples included several other mold species but they were in much lower levels. On November 10, I took 2 airborne mold samples in the same places with the same air volumes and sent them to the same lab for consistent comparison analysis. The lab report results show that there were: - 9,212 total airborne mold spores per cubic meter in the main room of the basement. - 2,667 total airborne mold spores per cubic meter in the back bedroom of the basement. The predominant species that were captured are chaetomium, cladosporium, aspergillus and penicillium. The airborne samples included several other mold species but they are in much lower levels. Therefore, the total airborne mold spores per cubic meter in the main room of the basement were reduced by 97.5% and, the total airborne mold spores per cubic meter in the back bedroom of the basement were reduced by 99.5%. Green Clean Air 1251 Weatherstone Ct. Reston, VA 20194 |
E. coli Reduction
MRSA Reduction
M. terrae (TB) Reduction
Mycobacterium terrae (M. terrae) is commonly used as a surrogate test for
Mycobacterium turberculosis as it demonstrates similar physical characteristics and is slightly more resistant but is far less dangerous. EMSL Analytical, Inc.
200 Rt. 130 N, Cinnaminson, NJ 08077 |
Ozone TestGPS Excels During UL 867 Ozone Testing
GPS is pleased to announce that our needlepoint bi-polar ion technology has achieved UL 867 including passing the new ozone testing required as of December 21, 2007. Don’t be fooled by other manufacturers claiming to have UL 867 on their products. Many manufacturers had their testing performed prior to the December 21, 2007 amendment requiring the closed chamber test for ozone and a peak ozone test. The UL Standard for Safety for Electrostatic Air Cleaners, UL 867, Section 37 Fourth Edition, December 21, 2007 is a stringent test requiring peak ozone testing 2.0” away from the output of the device as well as a sealed chamber test to confirm ozone does not build up over time. Many manufacturers of bi-polar ion technology, especially tube based ion systems, point to job site test data that may have had inaccurate sensing equipment and may have relied on the cooling coil condensate to reduce ozone levels before entering the space where the test equipment would have been located. The new UL 867 ozone test proves that if an electrostatic air cleaner (bi-polar ion generator) does not produce ozone in excess of acceptable levels of 0.05 PPM in a closed chamber, it will not produce ozone above acceptable levels in a duct. GPS has set the new standard for negligible ozone generation. The peak ozone test revealed a maximum ozone level of 0.0033 PPM! That is 15 times lower than the limit allows! If you are an engineer specifying ion systems on new construction, retrofit or renovation projects, specify the test standard that protects you and the owner, UL 867-2007. If you are an end user, make sure your product supplier meets the standard mentioned herein. If you have any questions, feel free to contact GPS or one of their Representatives today. Best regards, Charles H. Waddell President |
Efficacy Results
|
Testimonials
|
My siblings and I inherited my parent’s home - a 1940's farmhouse—which sat empty for over 6 years. The house always had problems with a damp basement. Since the house sat empty, mold and mildew grew and made the house basically uninhabitable. We were not able to use the house or even spend the night without headaches, allergies, etc. My sister and brother and I decided to try to eradicate the mold/mildew and use the house as a family retreat. After professionals treated the house, we were so concerned about the mold/mildew returning, we installed a GPS-600 stand-alone unit in the basement and (1) GPS-RN unit in the air handler that cools and heats the remainder of the house. We all have allergies to mold/mildew and so do our families. We were thrilled to hear about the units that would help keep our family home inhabitable and comfortable. The units we purchased about 9 months ago performed to our expectations. There are now no odors at all down in the basement even after we've had water in there several times since we installed the units. No odor upstairs either. No mold/mildew, no odors, no allergies! We love gathering at the family home and enjoying the farm together.
Thanks so much! B. Bolinsky |
I have heard good reports about your Bi-polar Ion unit from people that have installed them, but was skeptical about the claims that it removed odors. I called your company and borrowed a unit to fit a 7.5 ton system. I installed the unit for a space that housed 50-60 homeless people. The odor coming from this space and people was a “bone of contention” for the staff running the shelter. We installed the unit on Friday and by Monday morning there was no trace of the odor. This was verified by the staff with before and after with sniff tests only. We did not do any other tests than with our noses. The space had no odor at all. I’m a firm believer of your product after putting it through the hardest test I could find. Thank you for allowing us to accomplish this test. I highly recommend your product to anyone who asks about an increase their air quality.
Mark |
This is just a note to let you know how satisfied I am with the GPS ion generators recently installed at my home. As you may remember, I live in an old (+/-1856 AD) house on the hot and humid Mississippi gulf coast. The old frame house has a crawl space that seems to remain damp. My wife has always complained about the damp feel, and the mildew smell, in the house. A couple of days after the ion generators were installed we drove our grand-daughter back to college in Richmond, VA. We were gone for six days. With the house closed up for that whole time, we knew that this would be the supreme test of the ion generators. The generators passed with flying colors. My wife is happy, therefore I am ecstatic! The GPS ion generators have worked so well in my house, my wife has asked if I could buy some for our children's homes. My daughter that lives in New Orleans has severe problems in her AC system. I am sure the generators would really help her too. I will send you another order later today.
Thanks again, Chet |
Existing Customers
|
|
|
|
|
|
|
|
|
|
Products
|
GPS-FC
The GPS-FC is a carbon fiber brush, needlepoint, bi-polar ionization generator rated 1,200 CFM nominal capacity. The GPS-FC is great for mounting in fan coils, ductless mini-splits, chilled beams (patent pending), water source heat pumps or any other forced air systems with low air flow. Pricing starts at $795 per Unit Installed.
|
|
GPS-2400
The GPS-2400 is a carbon fiber brush, needlepoint, bi-polar ionization generator rated 2,400 CFM nominal capacity. The GPS-2400 is great for mounting in fan coils, ductless mini-splits, chilled beams (patent pending), water source heat pumps or any other forced air systems with low air flow. Pricing starts at $795 per Unit Installed.
|
|
GPS-RN
The GPS-RN is a 316 stainless steel needlepoint, bi-polar ionization generator rated 2,400 CFM nominal capacity. The GPS-RN is designed for duct mounting or AHU mounting. The GPS-RN housing is made from 316 stainless steel and includes illuminated on/off switch, ion output indication, dry-contact alarm output and 3 inch screw-on needle extensions. Pricing starts at $1350 per Unit Installed.
|
|
GPS-IBAR
The GPS-IBAR is a bi-polar ionization generator custom designed for any air flow and is constructed from extruded aluminum and contains 316 stainless steel ion needles. The GPS-IBAR may be mounted in AHU’s, RTU’s or installed in ducts with an optional duct mounting kit. Call For Pricing.
|
|
|
|